Products / Drilling equipment / Water well rigs
Drilling machines to bore water wells using direct circulation system, or reverse circulation, down hole hammer or mud drilling on both systems.
A range of models to reach down to 2.000 meters of depth, mounted on truck, crawler or low bodies.
There are different models as required by the costumer and the type of rocks in the territory to cover.
- It is possible to install on board air compressor or mud
pump, or both.
- Also drillrod automatic charger.
- Also drillrod store, water tank, etc
A range of models to reach down to 2.000 meters of depth, mounted on truck, crawler or low bodies.
There are different models as required by the costumer and the type of rocks in the territory to cover.
- It is possible to install on board air compressor or mud
pump, or both.
- Also drillrod automatic charger.
- Also drillrod store, water tank, etc
TECHNICAL DATA SEGOQUI 21
Purpose:
Capacity:
Power:
Max. Rotary torque:
Pull up:
Main hoist:
Total pull up:
Push down:
Max. r.p.m. rotary:
Rotary head:
Tower table:
Drill rods:
Rod magazine:
Mounting:
Aux. Hoist:
Other:
Capacity:
Power:
Max. Rotary torque:
Pull up:
Main hoist:
Total pull up:
Push down:
Max. r.p.m. rotary:
Rotary head:
Tower table:
Drill rods:
Rod magazine:
Mounting:
Aux. Hoist:
Other:
DTH hammer and direct circulation.
450 m depth with ø350mm.
150 kw (200 H.P) at 1.800 r.p.m.
2.200 kg x m.
24.000 kg.
36.000 kg.
50.000 kg (cylinder and hoist).
12.000 kg.
120 r.p.m.
With 3 speeds.
Hydraulic with 320 mm ID.
Ø114mm, ø140mm of 3 m long.
150 m in the rig.
Truck 6x6 or 6x4 with M.M.A. of 26.000 kg.
3.000 kg line pull.
Welding group 300 A.
Foam pump.
450 m depth with ø350mm.
150 kw (200 H.P) at 1.800 r.p.m.
2.200 kg x m.
24.000 kg.
36.000 kg.
50.000 kg (cylinder and hoist).
12.000 kg.
120 r.p.m.
With 3 speeds.
Hydraulic with 320 mm ID.
Ø114mm, ø140mm of 3 m long.
150 m in the rig.
Truck 6x6 or 6x4 with M.M.A. of 26.000 kg.
3.000 kg line pull.
Welding group 300 A.
Foam pump.
